Theatrix PRO 48 LED Cleaning
Due to fog residue, smoke, and dust cleaning the internal and exter-
nal optical lenses must be carried out periodically to optimize light
output.
1. Use a soft cloth to wipe down the outside casing.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
Listed below are a few common problems the user may encounter,
with solutions.
Unit not responding to DMX:
1. Check that the DMX cables are connected properly and are
wired correctly (pin 3 is “hot”; on some other DMX devices
pin 2 may be ‘hot’). Also, check that all cables are connected
to the right connectors; it does matter which way the inputs
and outputs are connected.
Unit does not respond to sound:
1. Quiet or high pitched sounds will not activate the unit.
If problems are not resolved;
Contact American DJ® for service.
1-800-322-6337
Theatrix PRO 48 LED Trouble Shooting
First unplug the power. The fuse holder is located next to the power
inlets. Using a flat-head screw driver unscrew the fuse holder. Remove
the bad fuse and replace with a new one.
Theatrix PRO 48 LED Fuse Replacement
Channel Value
Function
17 COLOR MACROS
PLEASE SEE 7 CHANNEL MODE
18 MASTER DIMMER
1 - 255 0% - 100%
19 STROBING
0 - 7 OFF
8 - 15 ON
16 - 131 STROBING SLOW - FAST
132 - 139 ON
140 - 181 SLOW OPEN - FAST CLOSE
182 - 189 ON
190 - 231 SLOW CLOSE - FAST OPEN
232 - 239 ON
240 - 247 RANDOM STROBE
248 - 255 ON
Theatrix PRO 48 LED DMX Values & Traits - 19 Channels
©
American DJ Supply
®
- www.americandj.com - Theatrix PRO 48 LED User Manual Page 22
©
American DJ Supply
®
- www.americandj.com - Theatrix PRO 48 LED User Manual Page 21
Theatrix PRO 48 LED Photometric Chart
