CHART ONE
Value
Result
0-13
Blackout
14-27
Program 1
28-41
Program 2
42-55
Program 3
56-69
Program 4
70-83
Program 5
84-97
Program 6
98-111
Program 7
112-125
Program 8
126-139
Program 9
140-153
Program 10
154-167
Program 11
168-181
Program 12
182-195
Program 13
196-209
Program 14
210-223
Program 15
224-237
Program 16
238-251
Program 17
252-254
Random Programs
255
Sound Active
©
American DJ
®
- www.americandj.com - Tempest 575H™ Instruction Manual Page 12
©
American DJ
®
- www.americandj.com - Tempest 575H™ Instruction Manual Page 11
Tempest 575H™
DMX Traits
Tempest 575H™ Lamp Replacement
Caution:
Always replace with the exact same type lamp, unless oth-
erwise specified by an authorized American DJ
®
service technician.
Replacing with anything other than the specified part can damage
your unit and will void your manufactures warranty.
Warning:
If you continue to blow lamps or the breaker, STOP using
the unit. Contact customer support for further instructions, you may
have to return the unit for servicing. Continuing to use the unit may
cause serious damage.
Lamp Replacement:
Caution! Never attempt to change the lamp
while the fixture is plugged in. Always disconnect the main power
and allow the unit ample time to cool before attempting to replace the
lamp. Lamp replacement has been made simple by incorporating the
use of a removable front cover that is retained by thumb screws.
1. Be sure to follow the proper handling procedures.
2. Remove the thumb screws on the replacement cover loctated on
the front of the unit.
3. After removing the thumb screws, remove the top cover to
expose the lamp socket assembly.
4. Carefully remove the old lamp.
5. Replace the lamp with an exact match and reassemble in reverse
order.
This unit is equipped with a built-in safety breaker. This breaker is
designed to close the power circuit in the event of an internal short
or power surge. This will reduce the risk of electrical shock or fire and
protect the circuitry. To reset the breaker, push the breaker button in
until you hear it “pop” back in to place. If the breaker continues to pop,
stop using the unit and contact our customer support team, the unit
may need to be returned for service.
Tempest 575H™ Breaker Reset
DMX Traits
This fixture is fitted with a halogen lamp which
are highly susceptible to damage if improperly
handled. Never touch the lamps with your bare
fingers as the oil from your hands will shorten
lamp life. Also, never move the fixture until the
lamps have had ample time to cool. Remember,
lamps are not covered under warranty condi-
tions.