SPECIFICATIONS: MODEL -
rotogobo
™
Weight:
5 lbs.
Size:
5" H x 6" W x 9" L
Lamp:
ZB-JCR 12V 100W
Fuse:
2A
Voltage In:
120V
Working
Position:
Any Safe position
Duty Cycle: None
Optional accessories: RG/Dichroic colors,RG/4-color
RG/Prism and custom gobos are
available, contact your dealer.
Affordable Quality Lighting Products from
American DJ
®
Los Angeles, CA. 90058
CAUTION! Read instructions before installing or plugging unit in.
Thank you for purchasing the rotogobo™ by American DJ®. For your convenience the rotogobo™
has been lamped and is ready to be used, there is no assembly required. Please read the following
instructions before installing or using your new rotogobo™.
Operating Instructions:
Unit is ready to be hung or set on flat surface. Unit will rotate gobos slowly. Motor rotation will start when unit is turned
on/off. For best results, we suggest using fog or special effects smoke when using this unit. This will enhance the effect
allowing you to see the beams of light. Use an American DJ® high quality mobile pro fog machine.
Caution! Never open unit when in use. Always disconnect main power before serving or replacing lamp. Remember
always replace same lamp and fuses.
Lamp replacement: Remove four screws from back of unit, not the ones holding the fan, and slide out back of unit and
disconnect lamp from socket. Remove and replace lamp.
Gobo replacement: Follow lamp replacement then carfefully remove snap ring around gobo remove and replace.
HALOGEN LAMP WARNING!
This fixture is fitted with halogen
lamps which are highly suscepti-
ble to damage if impr o p e r l y
handled. Never touch lamp with
bare fingers as the oil from your
hands will shorten lamp life. Also,
never move fixture until lamp
has had ample time to cool.
R e m e m b e r, lamps are not cov-
ered under warranty conditions.
American DJ
®
User
Instructions
r o t o
g o b o
™
GOBOS
ROTATE !
