background image

User Instructions

  Revo Rave™  

 

                                  Introduction

©

American DJ Supply

®

  -  www.americandj.com  - Revo Rave™ User Manual Page 2

  Rev. 4/10

Unpacking: 

Thank  you  for  purchasing  the  Revo  Rave™  by  Ameri-

can DJ

®

. Every Revo Rave™ has been thoroughly tested and has been 

shipped  in  perfect  operating  condition.  Carefully  check  the  shipping 
carton  for  damage  that  may  have  occurred  during  shipping.  If  the 
carton appears to be damaged, carefully inspect your fixture for any 
damage and be sure all accessories necessary to operate the unit has 
arrived intact. In the case damage has been found or parts are miss-
ing, please contact our toll free customer support number for further 
instructions. Do not return this unit to your dealer without first contact-
ing customer support. 

Introduction: 

The Revo Rave™ is part of American DJ’s continuing 

pursuit for creating high quality affordable intelligent fixtures. The Revo 
Rave™  is  a  DMX  intelligent  LED  effect.  This  fixture  light  weight  and 
compact which makes it a great piece for mobile DJ’s and clubs. This 
unit can be used in a master/slave configuration or stand alone sound-
active mode, or can be controlled via DMX controller. 

 

Customer Support:

 American DJ

®

 provides a toll free customer sup-

port line, to provide set up help and to answer any question should you 
encounter problems during your set up or initial operation. You may 
also visit us on the web at www.americandj.com for any comments or 
suggestions. Service Hours are Monday through Friday 9:00 a.m. to 
4:30 p.m. Pacific Standard Time.
 

Voice:   

(800) 322-6337

 

Fax: 

  

(323) 582-2941

 

E-mail:  

[email protected]

To purchase parts online visit http://parts.americandj.com

Warning!

 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Caution!

 

There are no user serviceable parts inside this unit. Do not 

attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact 
American DJ

®

.

PLEASE recycle the shipping carton when ever possible.

WARNING!

 Due to the magnifying type lens, please keep 

the lens out of contact with direct sunlight. Direct sunlight 
can cause heat to build up inside of the unit, which will 
seriously damage unit. 

Summary of Contents for REVO RAVE









Reviews: