User Instructions
12/09
Reflex Pulse LED™
Introduction
Unpacking:
Thank you for purchasing the Reflex Pulse LED™ by
American DJ
®
. Every Reflex Pulse LED™ has been thoroughly tested
and has been shipped in perfect operating condition. Carefully check
the shipping carton for damage that may have occurred during ship-
ping. If the carton appears to be damaged, carefully inspect your unit
for damage and be sure all accessories necessary to operate the unit
have arrived intact. In the event damage has been found or parts are
missing, please contact our toll free customer support number for fur-
ther instructions. Please do not return this unit to your dealer without
first contacting customer support at the number listed below.
Introduction:
The Reflex Pulse LED™ is a unique RGB LED effects
fixture. The unit comes with two moving heads that operate indepen-
dently of each other, as well as a LED strobe. The unit is sound active
only. To optimize beam intensity use this fixture with a fog machine or
other type of special effect smoke.
Customer Support:
American DJ
®
provides a toll free customer
support line, to provide set up help and to answer any question should
you encounter problems during your set up or initial operation. You
may also visit us on the web at www.americandj.com for any com-
ments or suggestions. For service related issue please contact Ameri-
can DJ
®
. Service Hours are Monday through Friday 9:00 a.m. to 4:30
p.m. Pacific Standard Time.
Voice:
(800) 322-6337
Fax:
(323) 582-2941
E-mail:
To purchase parts online visit http://parts.americandj.com
Warning!
To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Caution!
There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures
warranty. In the unlikely event your unit may require service please
contact American DJ.
PLEASE recycle the shipping carton when ever possible.
©
American DJ
®
- www.americandj.com - Reflex Pulse LED™ Instruction Manual Page 2
