Master-Slave Configuration:
This function will allow you to link up
to 16 units together and operate without a controller. In Master-Slave
operation one unit will act as the controlling unit and the others will
react to the controlling units programs. Any unit can act as a Master or
as a Slave.
1. Using appropriate XLR cables, daisy chain your units together via
the XLR connector on the rear of the units. Remember the Male
XLR connector is the input and the Female XLR connector is the
output. The first unit in the chain (master) will use the female XLR
con nector only - The last unit in the chain will use the male XLR
con nector only. For longer cable runs we suggest a terminator at
the last fixture.
2. Set the Master unit to your desired operational mode.
3. On the slave units
tap the MENU button until “SLND” is display-
ed, and Press ENTER. Use the UP or DOWN buttons to switch
between either “SL 1” or “SL 2”. Once you have made your
choice, press ENTER. For more info see page 8.
4. The slave units will now follow the Master unit.
Pixel Pulse Bar Master-Slave Configuration
Channel Value
Function
1 SHOWS
0 - 7 BLACKOUT
8 - 37 SHOW 1
38 - 67 SHOW 2
68 - 97 SHOW 3
98 - 127 SHOW 4
128 - 157 SHOW 5
158 - 187 SHOW 6
188 - 217 SHOW 7
218 - 247 SHOW 8
248 - 255 RANDOM SHOW
Pixel Pulse Bar 1 Channel Mode
Channel Value
Function
1 RED
0 - 255 0% - 100%
2 GREEN
0 - 255 0% - 100%
3 BLUE
0 - 255 0% - 100%
4 STROBING
0 - 8 NO FUNCTION
9 - 131 STROBING SLOW - FAST
132 - 139 NO FUNCTION
140 - 181 SLOW OPEN - FAST CLOSE
182 - 189 NO FUNCTION
190 - 231 FAST OPEN - SLOW CLOSE
232 - 239 NO FUNCTION
240 - 247 SOUND ACTIVE STROBING
248 - 255 NO FUNCTION
Pixel Pulse Bar 4 Channel Mode
ADJ Products, LLC - www.adj.com - Pixel Pulse Bar Instruction Manual Page 13
ADJ Products, LLC - www.adj.com - Pixel Pulse Bar Instruction Manual Page 14
Pixel Pulse Bar UC3 Control
e
r
u
t
x
if
e
h
t
t
u
o
k
c
a
l
B
t
u
o
k
c
a
l
B
Function
Strobe
1.Synchronous Strobe in white
2.Sound strobe in white
3.Sound strobe in color
Select color
1.color1-color7
2.color8-Sound
Change Color
Select Show
1-8
Mode
Sound (LED OFF)
Manual Color
(LED ON)
Show
(LED slow blinking)
