background image

User Instructions

  Mega Bar LED RC                                            Introduction

©

American DJ®  -  www.americandj.com  - Mega Bar LED RC Instruction Manual Page 2

  Rev. 6/11

Unpacking: 

Thank you for purchasing the Mega Bar LED RC by 

American DJ

®

. Every Mega Bar LED RC has been thoroughly tested 

and has been shipped in perfect operating condition. Carefully check 

the shipping carton for damage that may have occurred during ship-

ping. If the carton appears to be damaged, carefully inspect your fix-

ture for any damage and be sure all accessories necessary to operate 

the unit has arrived intact. In the case damage has been found or parts 

are missing, please contact our toll free customer support number for 

further instructions. Do not return this unit to your dealer without first 

contacting customer support. 

Introduction: 

The Mega Bar LED RC is part of American DJ’s con-

tinuing pursuit for creating high quality affordable intelligent fixtures. 

The Mega Bar LED RC is a DMX intelligent LED color wash. This wash 

can be used in a stand alone mode or connected in a Master/Slave 

configuration. The unit can also be controlled via DMX controller. This 

wash has four operating modes: Sound Active mode, Auto mode, Pro-

gram mode, and DMX control mode. 

 

Customer Support:

 American DJ

®

 provides a toll free customer sup-

port line, to provide set up help and to answer any question should you 

encounter problems during your set up or initial operation. You may 

also visit us on the web at www.americandj.com for any comments or 

suggestions. Service Hours are Monday through Friday 8:00 a.m. to 

4:30 p.m. Pacific Standard Time.

 

Voice:   

(800) 322-6337

 

Fax:    

(323) 582-2941

 

E-mail:  

[email protected]

To purchase parts online visit http://parts.americandj.com

Warning!

 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Caution!

 

There are no user serviceable parts inside this unit. Do not 

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact 

American DJ

®

.

PLEASE recycle the shipping carton when ever possible.

Summary of Contents for Mega Bar LED RC













Reviews: