background image

User Instructions

American DJ

® 

4295 Charter Street

Los Angeles Ca. 90058

www.americandj.com

  LED Vision  

 

 

                         Introduction

©

American DJ Supply

®

  -  www.americandj.com  - LED Vision Instruction Manual Page 2

  7/07

Unpacking: 

Thank you for purchasing the LED Vision by American 

DJ

®

. Every LED Vision has been thoroughly tested and has been shipped 

in perfect operating condition. Carefully check the shipping carton for 
damage that may have occurred during shipping. If the carton appears 

to be damaged, carefully inspect your fixture for any damage and be 

sure all accessories necessary to operate the unit has arrived intact. In 
the case damage has been found or parts are missing, please contact 
our toll free customer support number for further instructions. Do not 

return this unit to your dealer without first contacting customer sup

-

port. 

Introduction: 

The  LED  Vision  is  part  of  American  DJ’s  continuing 

pursuit for creating high quality affordable intelligent fixtures. The LED 
Vision is a bright DMX intelligent LED special effects fixture. 

The LED 

Vision can be used in a stand alone mode or connected in a Master/

Slave configuration. The unit can also be controlled via DMX controller.

 

This  fixture  has  five  operating  modes:  Program  mode,  Sound  Active 

mode, Auto mode, and DMX control mode. 

 

Customer Support:

 American DJ

®

 provides a toll free customer sup-

port line, to provide set up help and to answer any question should you 
encounter problems during your set up or initial operation. You may 
also visit us on the web at www.americandj.com for any comments or 

suggestions. Service Hours are Monday through Friday 9:00 a.m. to 
5:00 p.m. Pacific Standard Time.
 

Voice:   

(800) 322-6337

 

Fax: 

  

(323) 582-2941

 

E-mail:  

[email protected]

To purchase parts online visit http://parts.americandj.com

Warning!

 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Caution!

 

There are no user serviceable parts inside this unit. Do not 

attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact 
American DJ

®

.

PLEASE recycle the shipping carton when ever possible.

Summary of Contents for LED Vision








Reviews: