American DJ® www.americandj.com - LED Touch Page 14
American DJ® www.americandj.com - LED Touch Page 13
blink.
8. Press the UP or DOWN buttons, or turn the JOG WHEEL to
adjust the second, and then press the ENTER/HOLE TIME
button to store the change.
9. Press the UP or DOWN buttons, or turn the JOG WHEEL
until “STORE TIME SET” is displayed, press the ENTER/
HOLD TIME button save and exit, or press the MENU/FADE
TIME button to exit to the main menu without making any
changes.
LED Touch™
Set Time
LED Touch™
Set Clock
LED Touch™
Set Clock
In this submenu you can set a start up time.
1. Enter the Menu mode by pressing the MENU/FADE TIME
button for 3 seconds.
2. Press the UP or DOWN button or turn the JOG WHEEL until
“3. SET CLOCK” is displayed, press the ENTER/HOLD TIME
button.
3. The LCD will display “CLOCK SET: SUN” with “SUN” blinking
indicating to set the day.
4. Press the UP or DOWN buttons, or turn the JOG WHEEL to
adjust the day, and then press the ENTER/HOLE TIME button
to confirm.
5. The LCD will display “CLOCK /SUN:1”, press the UP or
DOWN buttons, or turn the JOG WHEEL to adjust the de-
sired timing; 1 to 3, this means that can set 3 timings a day.
Press the ENTER/HOLE TIME button to confirm.
6. The LCD will display “ON: SUN/XX:XX:XX”. Press the UP or
DOWN buttons, or turn the JOG WHEEL to move the cursor
to your desired number, and then press the ENTER/HOLD
TIME button. The number will begin to blink.
7. Use the UP or DOWN buttons, or the JOG WHELL adjust
the number then press the ENTER/HOLD TIME button again
to confirm.
8. Use the UP or DOWN buttons, or the JOG WHEEL to adjust
the hour, minute, and seconds. When your done, press the
ENTER/HOLD TIME button to store the ON time.
9. Turn the JOG WHEEL so that “OFF: SUN /XX:XX:XX” is dis
played.
10. Use the UP or DOWN buttons, or the JOG WHEEL to adjust
the day, hour, minute, and seconds. When your done, press
the ENTER/HOLD TIME button to store the OFF time.
NOTE: Timing is done on a weekly cycly, if the OFF time that is
set is before the ON time that is set, the timing will be not work.
11. Turn the JOG WHEEL or press the DOWN button, to go to
the next page, the LCD will display “CHASE /[X]”.
12. Press the ENTER/HOLD TIME button, the chase number
will begin to blink. Use the UP or DOWN button, or JOG
WHEEL to scroll to your desired chase, press the ENTER/
HOLD TIME button to confirm your desired chase.
13. Press the DOWN button, or use the JOG WHEEL to go to
the final page. The LCD will display “CLOCK /[OFF]”.
14. If you press the ENTER/HOLD TIME button, the display will
begin to blink, use the UP or DOWN buttons, or JOG
WHEEL to adjust the setting, either ON or OFF. Press the
ENTER/HOLD TIME button to confirm.
15. Press the DOWN button or use the JOG WHEEL to scroll to
the next page. The LCD will display “STORE /SUN1 SET”,
press the ENTER/HOLD TIME button to confirm all settings.
If you are successful, the Program/Rec LED and Blackout
LED will blink 3 times.
16. Follow the steps again to set other timings.
NOTE: Never set the same timings!
