American DJ
®
- www.americandj.com - LED Messenger Instruction Manual Page 9
American DJ
®
- www.americandj.com - LED Messenger Instruction Manual Page 10
rate of your phrase scroll. The flash rate is adjustable from
“F000”-”F100”. 000 have no flash to 100 being the fastest flash
rate. Press the SET UP button again once you have found your
desired flash rate.
6. “Pr.01” will once again be displayed, along with your desired
phrase scrolling at your selected speed and flash rate.
Selecting your desired program -
1. Press the MODE button, until “Pr.XX” is displayed.
2. Select a desired program “Pr.02”-”Pr.17”. Press the SET UP
button.
3. “S.XXX” will now be displayed. You can now set the speed
of your program. The speed is adjustable from “S001”-”S100”.
100 being the fastest speed. Press the SET UP button again
once you have found your desired program speed.
4. “F.XXX” will now be displayed. You can now set the flash
rate of your program. The flash rate is adjustable from “F000”-
”F100”. “F.000” having no flash to “F.100” being the fastest
flash rate. Press the SET UP button again once you have found
your desired flash rate.
5. Your desired program number will once again be displayed,
along with your desired program will play at your selected
speed and flash rate.
Selecting Buit-In Programs and Phrases via IR
Remote -
MODE -
1. Press the SELECT PROG button, until “Pr.XX” is displayed.
XX represents the phrase or program number that is displayed.
2. Select any programs by pressing the UP or DOWN buttons.
Selecting Buit-In Programs and Phrases via on
board control -
MODE -
1. Press the MODE button, until “Pr.XX” is displayed. XX repre-
sents the phrase or program number that is displayed.
2. Select any programs by pressing the UP or DOWN buttons.
3. “Pr01” is one of 15 programmed phrases, and “Pr02” - Pr17
are the built-in effect programs. To select your phrase please
see SET UP below.
SET UP -
Selecting your desired phrase -
Note: If the phrase contains four characters or less it will
scroll from right to left, top to bottom, and then bottom to
top. If the phrase contains more then four characters, the
phrase will only scroll from right to left.
1. Press the MODE button, until “Pr.XX” is displayed. XX repre-
sents the phrase or program number.
2. If you want a phrase to scroll choose “Pr.01. Now press the
SET UP button, rd.XX will be displayed. XX will represet the cur-
rent phrase number that is displayed.
3. Scroll to your desired phrase by pressing either the UP or
DOWN buttons. Once your desired phrase is found press the
SET UP button again.
NOTE: If you have not programmed
any phrases into memory, the phrases that you can choose
from will only be factory programmed phrases.
4. “S.XXX” will now be displayed. You can now set the speed
of your phrase scroll. The speed is adjustable from “S001”-
”S100”. 100 being the fastest speed. Press the SET UP button
again once you have found your desired scroll speed.
5. “F.XXX” will now be displayed. You can now set the flash
LED Messenge Selecting Programs & Phrases
LED Messenge Selecting Programs & Phrases
