©
American DJ
®
- www.americandj.com - Hypnotic RGB Instruction Manual Page 17
©
American DJ
®
- www.americandj.com - Hypnotic RGB Instruction Manual Page 18
Universal DMX Control:
This function allows you to use a Elation
®
universal DMX-512 controller to control the colors and rotation. A
DMX controller allows you to create unique programs tailored to your
individual needs.
1. The Hypnotic RGB is a 2 channel DMX fixture. See page 18 for
detailed description of the DMX values and traits.
2. To control your fixture in DMX mode, follow the set-up procedures
on pages 8-10 as well as the set-up specifications that are includ-
ed with your DMX controller.
3. Use the controller’s faders to control the various DMX fixture traits.
4. This will allow you to create your own programs.
5. Follow the instruction on page 12 to set the DMX address.
6. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
7. For help operating in DMX mode consult the manual included
with your DMX controller.
Hypnotic RGB
Operation
Hypnotic RGB UC3 Control
Channel Value
Function
1
LASER COLOR
0 - 7 OFF
8 - 37 RED
38 - 67 RED & GREEN
68 - 97 GREEN
98 - 127 GREEN & BLUE
128 - 157 BLUE
158 - 187 RED & BLUE
188 - 217 RED & GREEN & BLUE
218 - 247 ALL RANDOM
248 - 255 SOUND ACTIVE
2 LASER ROTATION
0 - 9 NO ROTATION
10 - 120 COUNTER-CLOCKWISE
FAST - SLOW
121 - 134 NO ROTATION
135 - 245 CLOCKWISE SLOW - FAST
246 - 255 NO ROTATION
Hypnotic RGB
DMX Traits
Hypnotic RGB Power Cord Daisy Chain
With this feature you can connect the fixtures to one another
using the IEC input and output sockets. The quantity that can be
connected is 24 fixtures maximum. After 24 fixtures you will need
to use a new power outlet. They must be the same fixtures. DO
NOT mix fixtures.
Hypnotic RGB
Operation
Master-Slave Configuration:
This function will allow you to link
up to 16 units together and operate without a controller. The units will
be sound activated. In Master-Slave operation one unit will act as the
controlling unit and the others will react to the controlling units pro-
grams. Any unit can act as a Master or as a Slave.
1. Using approved DMX data cables, daisy chain your units togeth-
er via the XLR connector on the rear of the units. Remember the
Male XLR connector is the input and the Female XLR connector
is the output. The first unit in the chain (master) will use the female
XLR connector only - The last unit in the chain will use the male
XLR connector only. For longer cable runs we suggest a termina-
tor at the last fixture.
2. Set your Master unit to your desired operating mode.
3. On the slave units press the MENU button until “
SLNd
” is dis-
played, and press ENTER. Choose either “
SL 1
” or “
SL 2
” and
press ENTER. See page 12 for more info.
4. The slave units will now follow the Master unit.
Stand By Blackout the unit
Function
Strobe (hold on the button)
1. Strobe in the same color
2. Strobe in random color
Select Shows
0-7
Selector rotation speed and
direction
Counter-Clockwise Fast - Slow
No Rotation
Clockwise Slow - Fast
Mode
Strobe
(Led off)
Color
(Led on)
Rotation
(Led blink)