©
American DJ
®
- www.americandj.com - Hypnotic RGB Instruction Manual Page 14
©
American DJ
®
- www.americandj.com - Hypnotic RGB Instruction Manual Page 13
Press the UP or DOWN buttons to find your desired show and press
the ENTER.
3. After press ENTER, “r XXX” will be displayed. This is the rotation &
speed adjustment setting. Press the UP or DOWN buttons to adjust to
your desired setting. Follow the values listed under DMX Mode Chan-
nel 2 on page 18 to make your adjustments.
4. Once you have found your desired rotation and speed press ENTER,
then press and hold the MENU button for at least 3 seconds to con-
firm.
Note:
After setting the rotation and speed, and then pressing ENTER
and then pressing and holding the MENU button to activate your show,
the LCD will display the set rotation and speed. If you would like the
display to show which show mode you are running go and select the
show again and press ENTER then hold MENU for 3 seconds. The
show will run at your adjusted speed and rotation that you set the first
time and the LCD will now display the show mode that is running.
SOUN
- In this mode you can run the unit in sound active
mode
1. Tap the MENU button until “
SOUN
” is displayed, press ENTER.
2. Either “
ON
” or “
OFF
” will now be displayed. Press the UP or DOWN
buttons to select one or the other.
3. When you have made your selection, press the ENTER, and then
press and hold the MENU button for at least 3 seconds to confirm.
SENS -
Sound sensitivity control.
1. Press the MENU button until “
SENS
” is displayed, press ENTER.
2. The display will show a number between 0-100. Press the UP or
DOWN buttons to adjust the sound sensitivity. 0 being the least sen-
sitive and 100 the most sensitive.
3. Press the ENTER to confirm.
Hypnotic RGB
System Menu
Hypnotic RGB
System Menu
BLNd -
Blackout or Stand by mode.
1. Tap the MENU button until “
BLNd
” is displayed, press
ENTER. Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until “Yes”
is displayed, press ENTER to confim. The fixture will now be in
Blackout mode. To deactivate Blackout mode, select “No” and
press Enter.
LEd -
With this function you can have the LED display
turn off after 10 seconds.
1. Tap the MENU button until “
LEd
” is displayed, press ENTER.
2. The display will show either “
ON”
or
“OFF
”. Press the UP or
DOWN buttons to select “
ON
” to keep the LED display on at
all times, or “
OFF
” to switch to have the LED display switch off
after 10 seconds.
3. Press ENTER and then hold MENU for at least 2-3 seconds
to confim.
dISP
- This function will reverse the display 180º.
1. Tap the MENU button until “
dISP
” is displayed, press ENTER.
2. The display will show either “
dISP”
or
“dSIP
”. Press the UP or
DOWN buttons to select “
dISP
” to keep the LED display normal,
or “
dSIP
” to ‘flip” the LED display 180 ̊.
3. Press ENTER and then hold MENU for at least 2-3 seconds
to confim.
TEST
- This function is a self-test program.
1. Tap the MENU button until “
TEST
” is displayed, press ENTER.
The unit will now run a self-test program
