background image

©

American DJ

®

  -  www.americandj.com - Hypnotic RGB Instruction Manual Page 12

©

American DJ

®

  -  www.americandj.com - Hypnotic RGB Instruction Manual Page 11

System Menu: When confirming your setting press ENTER 
and then hold MENU for at least 2-3 seconds, or you can 
wait 1 minute for automatic setup. To exit without making 
any adjustments press the MENU button. 

Addr

 - 

DMX Address Setting

 

via control board -

1. Press the MENU button until “

Addr

” is displayed, press ENTER.

2.  “

X

”  will  now  be  displayed,  “X”  represents  the  displayed  address. 

Press the UP or DOWN buttons to find your desired address. 
3. Press ENTER to confirm, then connect your DMX controller.

NOTE:

 If after you connect your DMX controller the unit does not fall 

into DMX mode, press and hold the MENU button for at least 3 sec-
onds.

SLNd -

 This will let you set your unit as a slave in a 

master/slave configuration.

1. Tap the MENU button until “

SLNd

” is displayed, press ENTER. 

Either “

SL 1

” or “

SL 2

” will be displayed.

2. Tap the UP or DOWN buttons until your desired setting is dis-
played, press ENTER and then hold MENU for at least 2-3 seconds 
to confim.

NOTE:

 In a Master/Slave configuration you can make one fixture the 

Master and then set the next fixture to “

SL 2

”, the fixtures will now 

have contrast movement to each other.

 

SHNd: SH

 

0

 

-

 

SH7

Show modes 0-7 (Factory programs). 

The rotation and speed of the running show is adjustable. 

The show mode can be run with sound activity or without. 

For  show  mode  to  run  without  sound  activity  turn  sound 

activity off. 

1. Press the MENU button until “

SHNd

” is displayed, press ENTER.

2. “

S

X

” will now be displayed, “X” representing a number between 

0-7. Programs 1-7 are factory programs, while “

S

0

” is random mode. 

 Hypnotic RGB                                                System Menu

 Hypnotic RGB 

 

                                System Menu

ME NU

B lackout Mode " N o B lackout "

B lackout Mode " Yes B lackout "

L E D o ff

L E D o n

Invers ion

Norma l

S lave Mode

DMX 512 Addres s S etting

F ixture H ours
S oftwa re V ers ion

S elf-tes t

S how M ode

S ound off

S ound on

S ens itivity

Summary of Contents for Hypnotic RGB













Reviews: