background image

Model: Hypnotic RGB

Voltage: 

 

 

100-240V, 50/60Hz

Power Consumption: 

13W

Lasers: 

 

 

30mW Green Diode 

 

 

 

 

80mW Red Diode

 

 

 

 

350mW Violet Blue Diode

Beam Angle:   

 

78 Degrees

Dimensions: 

 

 

10.5”(L) x 9.25”(W) x 4.75”(H)

 

 

 

 

268mm x 235mm x 121mm

Colors:

 

 

 

Red, Green, & Violet Blue

Weight:

 

 

 

8 Lbs. / 3.4 kgs.

Fuse:

   

 

 

7 Amp

Duty Cycle:

   

 

None

DMX: 

 

 

 

2 DMX Channels

Sound Active:

 

 

Yes

Working  Position:

   

Any Safe, Secure Position

Warranty: 

 

 

90 Days

Please Note:

 

Specifications and improvements in the design 

of this unit and this manual are subject to change without any 
prior written notice.

 Hypnotic RGB  

 

 

                    Specifications

Auto Sensing Voltage:

 This fixture contains a automatic volt-

age switch, which will auto sense the voltage when it is plugged 
into the power source.

©American DJ Supply

American DJ World Headquarters:

6122 S. Eastern Ave. Los Angeles, CA 90040 USA

Tel: 323-582-2650 / Fax: 323-582-2610

Web: www.americandj.com / E-mail: [email protected]

American DJ Europe

Junostraat 2

6468 EW Kerkrade

Netherlands

[email protected] / www.americandj.eu

Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99

©

American DJ

®

  -  www.americandj.com - Hypnotic RGB Instruction Manual Page 23

Summary of Contents for Hypnotic RGB













Reviews: