©
American DJ
®
- www.americandj.com - Galaxian Move™ Instruction Manual Page 14
©
American DJ
®
- www.americandj.com - Galaxian Move™ Instruction Manual Page 13
Show 4
- For fixtures fixed to the ceiling. The beam is projected
at the audience’s direction; i.e. in front of the stage. Pan move-
ment angle (left to right to left) is 160°. Tilt movement angle is
90°.
SLND -
This will let you set unit as a master or slave in a
master/slave configuration.
1. Tap the MENU button until “
SLND
” is displayed, press
ENTER. Either “
SL 1
” or “
SL 2
” will be displayed.
2. Tap the UP or DOWN buttons until your desired setting is
displayed, press ENTER to confim.
NOTE:
In a Master/Slave configuration you can make one
fixture the Master and then set the next fixture to “
SL 2
”, the
fixtures will now have contrast movement to each other.
SOUN -
Sound Active mode.
1. Tap the MENU button until “
SOUN
” is displayed, press
ENTER.
2. The display will show either “
ON”
or
“OFF
”. Press the UP or
DOWN buttons to select “
ON
” to activate sound active mode, or
“
OFF
” to deactivate sound active mode.
3. Press ENTER to confirm.
BLND -
Blackout or Stand by mode.
1. Tap the MENU button until “
BLND
” is displayed, press
ENTER. Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until “Yes”
is displayed, press ENTER to confim. The fixture will now be in
Blackout mode. To deactivate Blackout mode, select “No” and
press Enter.
I PAN -
Pan Inversion
1. Tap the MENU button until “
I PAN
” is displayed, press ENTER.
Either “NO” or “I” will be displayed.
2. To activate the Pan inversion tap the UP or DOWN buttons
until “
I”
is displayed, press ENTER to confim. To deactivate Pan
inversion, select “NO” and press Enter.
I TLT -
Tilt Inversion
1. Tap the MENU button until “
I TLT
” is displayed, press ENTER.
Either “NO” or “I” will be displayed.
2. To activate the Tilt inversion tap the UP or DOWN buttons
until “
I
” is displayed, press ENTER to confim. To deactivate Tilt
inversion, select “NO” and press Enter.
LED -
With this function you can have the LED display
turn off after 10 seconds.
1. Tap the MENU button until “
LED
” is displayed, press ENTER.
2. The display will show either “
ON”
or
“OFF
”. Press the UP or
DOWN buttons to select “
ON
” to keep the LED display on at
all times, or “
OFF
” to switch to have the LED display switch off
after 10 seconds.
3. Press ENTER to confirm.
DISP
-
This function will reverse the display 180º.
1. Tap the MENU button until “d
ISP
” is displayed, press ENTER.
2. Either “
DISP
” (display normal) or “
DSIP
” (display inversion) will
now be displayed. Press the UP or DOWN buttons to select one
or the other.
3. Press ENTER to confirm, or press the MENU button
to return
Galaxian Move™
System Menu
Galaxian Move™
System Menu
