©
American DJ
®
- www.americandj.com - Galaxian Move™ Instruction Manual Page 12
©
American DJ
®
- www.americandj.com - Galaxian Move™ Instruction Manual Page 11
CAUTION IMPORTANT! When installing this projector, make sure
that it is mounted in a manner that prevents the audience from
looking directly into the beam, and the beam from striking the
audience.
System Menu: When making adjustments you can press
ENTER to confirm your setup or
you can wait 8 seconds for
automatic setup. To exit without making any adjustments
press the MENU button.
ADDR -
DMX Address Setting
.
1. Tap the either the MENU, UP, or DOWN buttons until “
ADDR
”
is displayed, press ENTER.
2. The current address will now be displayed and flashing.
Press the UP or DOWN buttons to find your desired address.
Press ENTER to set your desired DMX address.
SHND -
This will let you choose one of the four prepro-
grammed shows. See show descriptions below.
1. Tap the either the MENU button until “
SHND
” is displayed,
press ENTER. Either “
SH 1
”, “
SH 2
”, “
SH 3
” or “
SH 4
” will be dis-
played.
2. Tap the UP or DOWN buttons to find you desired show and
then press ENTER to confim and exit.
SHOWS:
Show 1
- For fixtures placed on the floor, the tilt movement
angle is 210°
Show 2
- For fixtures fixed to the ceiling or truss, the tilt move-
ment angle is 90°.
Show 3
- For fixtures placed on a table. The beam is projected
at the audience’s direction; i.e. in front of the stage. Pan move-
ment angle (left to right to left) is 160°. Tilt movement angle is
90°.
Galaxian Move™
System Menu
Galaxian Move™
System Menu Chart
