background image

For Your Own Personal Safety, Please Read and Understand This 

Manual Completely Before You Attempt To Install Or Operate 

This Unit!

•   To reduce the risk of electrical shock or fire, do not expose this unit  

   rain or moisture
•   Do not spill water or other liquids into or on to your unit.
•   Be sure that the local power outlet match that of the required volt-
   age for your unit.
•   Do not attempt to operate this unit if the power cord has been 
   frayed or broken. 
•   Do not attempt to remove or break off the ground prong from    
   the electrical cord. This prong is used to reduce the risk of electrical  

   shock and fire in case of an internal short.

•   Disconnect from main power before making any type of connection.
•   Do not remove the cover under any conditions. There are no user  
   serviceable parts inside.
•   Never operate this unit when it’s cover is removed.
•   Always be sure to mount this unit in an area that will allow proper  
   ventilation. Allow about 6” (15cm) between this device and a wall.
•   Do not attempt to operate this unit, if it becomes damaged.
•   This unit is intended for indoor use only, use of this product out-
   doors voids all warranties.
•   Always mount this unit in safe and stable matter.
•   Power-supply cords should be routed so that they are not likely to  
   be walked on or pinched by items placed upon or against them,  
   paying particular attention to cords at plugs, convenience recep- 

   tacles, and the point where they exit from the appliance. 
• Cleaning -The fixture should be cleaned only as recommended by  

   the manufacturer. See page 18 for cleaning details.

•   Heat -This fixture should be situated away from heat sources such 

   as radiators, heat registers, stoves, or other appliances (including 
   amplifiers) that produce heat.

•   The fixture should  be serviced by qualified service personnel when:

    A. Objects have fallen, or liquid has been spilled into the appliance.

    B. The appliance has been exposed to rain or water.
    C. The appliance does not appear to operate normally or exhibits a  

     

  

 marked change in performance.

 Fantasy 250™  

 

                        Safety Precautions

  Fantasy 250™  

                          Halogen Lamp Warning

Caution!

 There are no user serviceable parts inside this unit. Do not 

attempt  any  repairs  yourself,  doing  so  will  void  your  manufactures 
warranty.  In  the  unlikely  event  your  unit  may  require  service  please 
contact American DJ

®

.

During operation the housing may become extremely hot. Avoid touch-
ing the unit with bare hands while in use.
American DJ

®

 will not accept any liability for any resulting damages 

caused  by  the  non-observance  of  this  manual  or  any  unauthorized 

modification to this unit.

  Fantasy 250™  

                             Handling Precautions

American DJ

®

  -  www.americandj.com  - Fantasy 250™ Instruction Manual Page 4

American DJ

®

  -  www.americandj.com  - Fantasy 250™ Instruction Manual Page 3

This unit emits intense UV radiation which is harmful to the eyes and 
skin.  The  intense  luminance  of  the  lamp  can  cause  severe  damage 
to the retina. Never operate this unit without it’s covers, these covers 
have been specially designed to shield against UV radiation.

Epileptic Warning: 

Those suffering from epilepsy should avoid looking 

directly into the lamp at all times.

Avoid switching the fixture on and off repeatedly in short intervals as 

this will reduce lamp life and intensity.
To achieve the intensity associated with discharge lamps, these lamps  
use gas sealed in a high pressure environment to emit a brilliant output.  
Due to the high pressure involved with the construction of the lamp, 

the  lamp  may  explode  during  prolonged  extensive  use.  This  risk  is 

increased with age, added care is encouraged when dealing with older 

lamps.  Extreme  caution  should  be  used  when  operating  this  or  any 
fixture fitted with a gas discharge lamp. Never open this unit while in 

use.

This fixture is fitted with a discharge lamp which 

is  highly  susceptible  to  damage  if  improperly 
handled. Never touch the lamp with your bare fin-
gers as the oil from your hands will shorten lamp 

life.  Also,  never  move  the  fixture  until  the  lamps 

have had ample time to cool. Remember, lamps 
are not covered under warranty conditions.

Summary of Contents for Fantasy 250











Reviews: