©
American DJ
®
- www.americandj.com - Emerald Star™ Instruction Manual Page 7
Emerald Star™
Control & Functions
1. Audio Sensitivity Knob -
This adjust audio sensitivity of the internal
microphone (2). Turning the sensitivity knob in the clockwise direction
will increase the sensitivity to sound. Turning the knob in the counter
clockwise direction will decrease the fixture’s sensitivity to sound.
2. Microphone -
This microphone receives external low frequencies
to trigger the unit in Sound-Active mode. This microphone is designed
to receive low frequency sounds only, tapping on the microphone and
high pitch sounds may not trigger the unit.
3. Power Cord Connection -
This connection is used to supply main
power to the fixture. Use only the supplied I.E.C. power cord. Be sure
the main power matches the required power of your fixture.
4. Fuse Holder -
This housing stores the 2 amp GMA protec-
tive fuse. Always replace with the exact same type fuse, unless other
wise instructed, by an authorized American DJ
®
service technician.
Emerald Star™
Operation
CAUTION IMPORTANT! When installing this projector, make sure
that it is mounted in a manner that prevents the audience from
looking directly into the beam, and the beam from striking the
audience.
Power Supply:
This unit is available in both 120v and 220v options,
before plugging your fixture in be sure the source voltage in your area
matches the required voltage for your American DJ
®
Emerald Star.™
General Operation:
Plug and Play operation
. This fixture is
designed to operate as a stand alone unit. It has been tested at the
factory there is no assembly necessary. The Emerald Star™ is ready
to be plugged in, out of the box. There is no power switch, after plug-
ging the fixture in the laser will immediately begin to cycle through
the many built in patterns. The unit comes with several built-in pat-
terns that automatically cycle through when the unit is operating, the
patterns may not be selected manually. If the unit does not turn on
after the unit has been plugged in, be sure the fuse has not blown
and the unit is properly plugged in to a matching wall outlet. If prob-
lem continue to persist, please contact customer support for further
instructions.
Sensitivity Knob:
A sound sensitivity knob is located on the rear
of the unit. Use this knob to regulate the amount of sound it takes to
trigger the unit. Turning the knob in a clockwise direction will increase
the units sensitivity to sound, turning the knob in a counterclock-
wise direction will decrease the units sensitivity. Turning the knob
completely to the counter-clockwise direction will turn off the sound-
active mode.
SOUND
MIN
MIN
LEVEL
FUSE
AC 100-120V
AC 200-240V
Model : Emerald Star
Serial No : ____________
Power : ___________
Fuse : ___________
Bulb : ___________
DANGER
VISIBLE LASER RADIATION
-AVOID DIRECT EYE EXPOSURE
LASER DIODE
WAVELENGTH : 532 nm
Max Output : <4.9mW
Class IIIa Laser Product
1
4
3
2
©
American DJ
®
- www.americandj.com - Emerald Star™ Instruction Manual Page 8