©
American DJ Supply
®
- www.americandj.com - Electra LED DMX™ User Manual Page 12
©
American DJ Supply
®
- www.americandj.com - Electra LED DMX™ User Manual Page 11
Due to fog residue, smoke, and dust, cleaning the internal and exter-
nal optical lenses must be carried out periodically to optimize light
output.
1. Use normal glass cleaner and a soft cloth to wipe down the out-
side casing.
2. Use a brush to wipe down the fan grill.
3. Clean the external optics with glass cleaner and a soft cloth every
20 days. Situation may very. If used heavily in clubs with lots of
fog, cleaning may be required more often.
4. Clean the internal optics with glass cleaner and a soft cloth every
30-60 days.
5. Always be sure to dry all parts completely before plugging the
unit in.
Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).
Trouble Shooting:
Listed below are a few common problems that
you may encounter, with solutions.
No light output from the unit;
1. Be sure the voltage of your fixture matches the voltage of the wall
outlet.
2. Be sure the fuse has not blown. The fuse is located on the rear
panel.
Unit does not respond to sound;
1. Low frequencies (bass) should cause the unit to react to sound.
Tapping on the microphone, quiet or high pitched sounds may not
activate the unit.
Electra LED™
Trouble Shooting
This chart list the DMX dip switch setting for DMX address 1 through
511. Follow the instructions below to configure fixture dip switches with
your desired DMX address.
Electra LED DMX™ DMX Dipswitch Chart
Electra LED DMX™ Cleaning