time function
(TOTAL REMAIN (50), REMAIN
(47) OR ELAPSE (41).
This bar will begin to
flash when 15 seconds of a track remain and will
begin to rapidly flash when three seconds of a
track remain. The flashing bar is a great visual
reminder a track is about to end. The flashing
bar will function regardless of which time mode
the unit is in.
47. REMAIN INDICATOR -
This indicator is in
direct reference to the
TIME METER (42, 43, &
43)
. When the
REMAIN
indicator is displayed in
the LCD, the time defined will refer to a single
track's remaining time. The time mode is changed
by tapping on
TIME BUTTON (5).
48. RELOOP INDICATOR -
This icon will display
when a LOOP is engaged or is set and ready
to be engaged.
49. LOOP -
This icon flashes when a loop is
engaged or displays when a loop is not engaged
but is set and ready to be engaged.
50. TOTAL REMAIN INDICATOR -
This indicator
is in direct reference to the
TIME METER (42,
43, & 43)
. When the
TOTAL REMAIN
indicator is
displayed in the LCD, the time defined will refer
to a disc's total remaining time. The time mode is
changed by tapping on
TIME BUTTON (5).
51. SINGLE INDICATOR -
This indicates the unit
is in single play mode, the unit will play a single
and return to CUE mode. If the single indicator
is not displayed the unit is in continuous mode.
In continuous mode the drive will play through all
the tracks on the disc. Once all the tracks have
ended the unit will return to cue mode.
52. 1 INDICATOR -
This indicator is in direct
reference to the
REPEAT (53)
indicator and
REPEAT (9)
function. When the repeat function
is first activated, the unit enters a repeat track
mode. This mode will repeat a single track over
and over until the repeat function is disengaged.
The single track repeat function is indicated by
the
REPEAT (53)
and
1
icons in the LCD.
53. REPEAT INDICATOR -
This indicator is in
direct reference to the
REPEAT (9)
function.
When the repeat function is activated the REPEAT
LIQUID CRYSTAL DISPLAY (LCD) CONT.
©
American Audio
®
- www.americandj.com - PRO-DJ2FX™ Instruction Manual Page 13
icon will display in the LCD. When the repeat
function is first activated, the unit enters a repeat
track mode. This function is indicated by the
REPEAT
and
1
(52)
icons in the LCD. Tapping
on the
REPEAT (9)
button once more will activate
the repeat disc option. This function will repeat
the entire disc over and over until the repeat
function is disengaged. The repeat disc function
is indicated by the
REPEAT
icon displayed in the
LCD without the
1
icon.
