
-
14
-
1. Power Source
①
Press the "POWER" switch on the operation panel.
・
The
light comes on, the preset value is displayed, and the unit enters the standby state.
・
When none of the operation switches is touched for 10 minutes, the power saving function is
activated, the display light goes out, and a dot blinks on the digital temperature screen.
Press any switch other than the "LID OPEN" switch, and the unit returns to the standby state.
●
When the power supply is interrupted or the main power switch is turned OFF, the temperature
and time set for the previous operation will appear.
2. Pouring Water
●
When the sterilization time is extended or a large quantity of cloth is put in, pour a larger quantity
of water than specified.
①
Press the "LID OPEN" switch.
・
The lid will open automatically.
②
Pour water until water rises through the center hole of the
bottom plate.
・
When there is no water at all, pour 3 liters of water for
HG-50 and 3.5 liters for HG-80. Supply of water is
also necessary for the dissolution cycle.
△
NOTE
IMPORTANT
P R E S S
T I M E
PROGM 1
TEMP
2
3
℃
MPa
Hr/min
W A R M
℃
Summary of Contents for Hirayama HG-50
Page 8: ... 7 HG 80 External View ...