57
3.19 TFTP Server
The TFTP Server page (Figure 3-59) allows the user to set the TFTP server for the switch to use to send
and receive files from a local computer on the network. Enter the IP address of the server and click
“Apply” to save the changes.
Figure 3-59: TFTP Server Page
3.20 Log
The Log page (Figure 3-60) shows the log of system events. There are 19 private trap logs and 5 public
trap logs that are stored in the log which correspond to the SNMP trap events. The switch supports a total
of 120 log entries. For more details on log entries, refer to the section on Trap/Alarm Configuration and
SNMP Configuration. In the report table, No., Time and Events are displayed for each trap record.
Figure 3-60: Log Data Table
No.:
Display the order in which the trap occured.
Time:
Display the time that the trap occured.
Events:
Display the trap event name.
Auto Upload Enable:
Switch the enabled or disabled status of the auto upload function, which will upload
the log through TFTP automatically.
Upload Log:
Upload log data through TFTP.
Clear Log:
Clear log data.
