10 MAINTENANCE
Electric Portable Patient Lift
40
10.9 Replacing Casters/Forks
Replacing Rear Casters
1.
Place the lift on its side.
2.
Remove the bolt and locknut that secure the existing rear caster to
the fork.
3.
Install the new/existing bushing into the new rear caster.
4.
Line up the mounting holes in the new rear caster and the fork.
5.
Install the bolt through the fork and new rear caster and tighten
securely with the locknut.
WARNING
Ensure that there is sufficient room to turn patient lift on its side and that floor area is clear of debris. Otherwise, injury to personnel or
damage to patient lift may occur.
The bushing will be loose and may fall out of the caster.
Existing bushing will be reused. Examine and replace if
worn.
Base
Fork
Bolt
Bushing
Rear Caster
Locknut
