AMD FirePro W600, User Manual

Page: 8 / 38

6. Install the AMD FirePro drivers and configuration software from the AMD
Installation disc.
1.3 Before You Begin Installation
Once you have determined that your system meets the minimum requirements,
please perform the following tasks before installing your AMD FirePro W600
workstation graphics card.
1.3.1 Recording Serial Numbers
The serial number and 102 part number on the graphics card are required for product
registration. They are located on a sticker on the back of the graphics card and are
shown in boldface and underlined in the illustration below.
Record these numbers in the space provided below and retain for future use.
1. Remove the graphics card from packing.
2. Locate the white label on the back of the graphics card.
3. Record the serial number and 102 part number.
Figure 1–1 Typical Serial Number and 102 Part Number Arrangement
1 Serial number (S/N)
2 102 part number (P/N)
1.3.2 Uninstalling Previous Drivers in Windows 7 or Windows Vista
Follow these steps to uninstall the existing graphics card driver in Windows 7 or
Windows Vista in preparation for installation of a new card.
1. With the current graphics card still in the computer, close all open applications.
2 Getting Started
AMD FirePro W600
©
2012 Advanced Micro Devices, Inc.