125
Figure 5-26
Please refer to the following sheet for detailed information.
Parameter
Function
Enable
Please check the box here to enable the email function.
SMTP Server
Input the server address and then enable this function.
Port
The default value is 25. You can modify it if necessary.
Anonymity
For the server that supports the anonymity function. You can
auto login anonymously. You do not need to input the user
name, password, and sender information.
User Name
The user name of the sender email account.
Password
The password of the sender email account.
Sender
Sender email address.
Authentication
(Encryption
mode)
You can select SSL or none.
Subject
Input email subject here.
Attachment
The system can send out an email of a snapshot once you
check this box.
Receiver
Input receiver email address here. A max of three addresses.
It supports SSL and TLS email addresses.
Interval
The send interval ranges from 0 to 3600 seconds. 0 means
there is no interval.
Please note system will not send out the email immediately
when the alarm occurs. When the alarm, motion detection, or
the abnormity event activates the email, the system sends out
the email according to the interval you specified here. This
function is very useful when there are too many emails
Summary of Contents for General 1080P(V2) Mini 1U Series
