AMCI NEXUS NX2A4E2, User Manual

Page: 45 / 76

20 Gear Drive, Plymouth Ind. Park, Terryville, CT 06786

Tel: (860) 585-1254 Fax: (860) 584-1973 http://www.amci.com
NX2A4E2 User Manual
S
ET THE
IP A
DDRESS AND
P
ROTOCOL
45
2.2c Use the Embedded Web Server
PREREQUISITE: You must know the present IP address of the NX2A4E2. The factory default address is
192.168.0.50.
PREREQUISITE: Task 1.4: Power Wiring found on page 35. You must be able to power the NX2A4E2.
PREREQUISITE: Task 1.5 Network Connections found on page 35. You must attach your NX2A4E2 to
your computer.
PREREQUISITE: The network interfaces on your computer must be on the same subnet before you can
communicate with an NX2A4E2. Refer to Configuring Network Interfaces , which starts on page 29 if
needed.
2.2c.1 Disconnect the NX2A4E2 from the host controller and cycle power to the NX2A4E2.
This ensures that the unit does not have any open connections to the host controller.
2.2c.2 Start your web browser and connect to the NX2A4E2
The internal HTML pages should work with any browser. Once your web browser is running, enter the pres-
ent IP address of the NX2A4E2 into the address bar. The default address is 192.168.0.50. The unit will
respond with the following page. Note that the Firmware Version number may be different.
Figure T2.2 NX2A4E2 Information Webpage