AMC-UTx-M-xx-400 Series Digital Transmitter
41
Table 5-6: Sensor Alarm Configuration
Menu Item
Description
Alarm SP 1-3
Select this menu item to edit the alarm
setpoints for the selected alarm (1-3)
Alarm Hyst
Select this menu item to edit the alarm
hysteresis. This hysteresis value is applied to
all alarm setpoints.
Zero Buff
Select this menu item to edit the zero buffer
level for the display of small gas
concentrations.
Cal Period
Select this menu item to edit the time period
between re-calibrations
Exit
Select this menu item to return to the Sensors
sub-menu.
If ‘Alarm SP 1’ is activated from the sensor sub-menu, then the display will be updated to show
the following editing screen.
When the
ENTER
button is pressed, the screen will update to display the confirmation dialog
(described previously).
The same process is repeated for Alarm SP 2 and Alarm SP 3. In all cases, once the
confirmation dialog is reached, regardless of which option it selected, the user is returned back
to the Sensors sub-menu.
If ‘Alarm Hyst’ is activated from the sensor sub-menu, then the display will be updated to show
the following editing screen.
When the
ENTER
button is pressed, the screen will update to display the confirmation dialog
(described previously). If Yes is selected, the edit value is persisted as the new value for the
Alarm Hysteresis for the selected sensor. Otherwise, the edit value is rejected. In either case,
the menu returns to the Sensor sub-
menu menu with the ‘Alarm Hyst’ menu item selected.
If ‘Zero Buff’ is activated from the sensor sub-menu, then the display will be updated to show the
following editing screen.
