32
AMC VIBRATION SENSOR / ©AMC VIBRO Sp. z o.o.
AVM 2000R
ID 1
Register
Address
Type
Size
[B]
Unit / Range
acceleration
RMS
2068
uint16_t
2
x0.001 m/s2
acceleration
Kurtosis
2069
uint16_t
2
number
velocity 0-Peak
2070
uint16_t
2
x0.001 m/s
velocity RMS
2071
uint16_t
2
x0.001 m/s
ISO-velocity
RMS
2072
uint16_t
2
x0.001 m/s
envelope Peak-
Peak
2073
uint16_t
2
x0.001 m/s2
envelope RMS
2074
uint16_t
2
x0.001 m/s2
Band[8]
2075
8x
uint16_t
16
x0.001 m/s2 or x0.001
m/2
*acceleration or
velocity
Figure 26. Date reading from the Vibration sensor ID 1
Important notice- data format is made in a way to provide marking of warnings and alarms as well as
self-diagnostic status. The method of marking is as follows:
»
Warnings and Alarms – the value in the warning and alarm field has a 16-bit binary format.
A value of 1 indicates the presence of a warning or alarm and a value of 0 means that they are
not present. The LSB (in a file the first bit visible on the far right side) means the alarm of the
first estimate, that is acceleration 0-Peak from channel X. The second bit from the left means
that the source of occurrence is acceleration RMS from channel Y and so on.
»
SENSOR Status – bit coding is as follows, counting out from LSB (that is from the right side).
The value of 1 means the presence of the mentioned state:
1.
Active mode
2.
Temperature measurement failed
3.
RTC chip error
4.
Flash memory error
5.
RAM memory error
6.
Analog process failed
7.
Not used
8.
Reconfiguration not received yet
9.
Reconfiguration error
