21
AMC VIBRATION SENSOR / ©AMC VIBRO Sp. z o.o.
Data storage and presentation
7.1.
General information
When it comes to presenting the layout of the network the first tab which appears immediately after
entering the website is the most important one. After entering the website you go to the Status tab (on
the banner at the top) and to the Overview field (in the bar on the left). You find there a graphical
representation of the state of sensors, their name, MAC address and battery status. All modules present
in the network assigned to the GATEWAY are visible in the Overview field. To remove them from the
network click on the X mark in the upper right corner of the rectangle representing the AVS device or
on the left side in the screen.
Figure 13. Front page of GATEWAY – Boxes view
7.2.
Status
The condition of the sensors is explained in the legend in the upper right corner. Meaning of colors:
»
green - none of the estimates exceeds the set thresholds
»
yellow - there is at least one warning
»
red - there is at least one alarm
