Ambit U10C017, User Manual

Page: 4 / 51

User’ Guide
4
Tools.................................................................................................................................................................. 51
Reset Defaults ........................................................................................................................................ 51
1. Introduction
The Ambit Cable Modem with Embedded MTA (EMTA) provides high-speed internet access and
telephony service over a cable through your cable service provider. This user guide describes how
to set up and use the cable modem. Before installing the cable modem, you should read this user
guide to ensure proper cable modem operation.
Understand the Cable Modem’ Features
The Ambit Cable Modem with Embedded MTA (EMTA) combines the latest technology
available in the industry today. Ambit’ EMTA is based on DOCSIS 2.0 and PacketCable
technology, ensuring compliance with today’ industry standards. The end result is a single robust
device that provides high-speed data and telephony service over a cable line.
The U10C017 EMTA supports all the hardware features needed in a residential environment.
Users can place voice and fax calls using the two RJ-11 telephone lines. PCs can connect to the
Internet using USB or 10/100Base-T Ethernet port (or both simultaneously if supported by
MSO).
Prepare Your Area for Cable Modem Installation
Before installing your cable modem, you should first prepare your area. To do this:
1. Locate your cable outlet and ensure that it is located within proper distance of your cable
modem, telephone and computer. Be sure not to bend the cable as this may strain the
connector and cause damage.
2. Ensure that the temperature in the room where the cable modem will be operating is
between 0 and 40
°
C (32 and 104
°
F)
Gather Supplied and Required Items
You will use a variety of items to install your cable modem. Some of the items are supplied with
your cable modem.