User’s Guide
42
Uncheck “
Enable
” to disable blocking Fragmented IP Packets.
"With this feature enabled, all packets are checked to determine if the packet contains a "fragment"
flag. If the flag exists, the CM will discard the packet. This feature is used primarily to protect
against any intruders/hackers from gaining access to the router or network." "Under certain
conditions, this feature may cause communication issues with other devices on the network and
should be disabled. For example, streaming media applications may fragment the packets
depending on the encoding used for the video stream. Depending on the encoding used for the clip,
some or a majority of the packets will become fragmented. For clips encoded at 300 Kbps, 66% of
the packets are IP fragments, while below 100 Kbps there is no fragmentation
.
•
Firewall Protection
Check “
Enable
” to enable Firewall Protection.
Uncheck “
Enable
” to disable Firewall Protection.
•
Access Routed Subnet Protection
Check “
Enable
” to enable Routed Subnet Protection.
Uncheck “
Enable
” to disable Routed Subnet Protection.
•
Apply
Any configuration changes must be followed by “
Apply
” before changes will occur.
•
Trusted Computers - Add
Specify MAC address for trusted computer and click “
Add
” to add it to the list.
•
Trusted Computers - Remove
Select MAC address from trusted computer list and click “
Remove
” to remove it from the list.
