0501UCA
2/25
INDEX
Page
1. General...................................................................................................................................................2
2. Technical
data ........................................................................................................................................3
3. Installing .................................................................................................................................................5
4
Air supply requirements..........................................................................................................................6
5. Flue
system ............................................................................................................................................7
6 Gas
connection.......................................................................................................................................9
7 Electrical
connection...............................................................................................................................9
8. Commissioning .....................................................................................................................................10
9 Servicing...............................................................................................................................................13
10
Short parts listing..................................................................................................................................18
11. Gas
conversion.....................................................................................................................................19
12. Fault
finding ..........................................................................................................................................20
13. Health and Safety information ..............................................................................................................21
14. User
instructions...................................................................................................................................22
N.B.
If optional equipment is supplied with this appliance please refer to the additional instructions supplied with the option.
1. GENERAL
1.1 Before
installation,
check that the appliance as
described on the packaging label is in
accordance with the correct type and model as
specified on the data plate and complies with
your customer order.
1.2
After unpacking the appliance, leave it fastened
to the wooden pallet until it has been suspended
or until just before base mounting. This affords
protection to the painted underside which is
normally exposed to view after installation.
1.3
Please read this document before commencing
installation.
1.4 These
instructions
are
only valid for the country
of use indicated on the appliance i.e.: GB - IE. If
these symbols are not shown, it is necessary to
obtain appropriate technical instructions which
will provide information concerning the
necessary modification of the appliance for the
conditions of use in the country concerned. Such
instructions may be obtained upon request from
your supplier.
1.5 Check that the local distribution conditions of
electricity supply, type of gas and pressure, and
adjustment of the appliance are compatible.
1.6 When installed in Great Britain the total
installation must comply with the requirements
and recommendations of British standard BS
6230 1991. "Installation of Gas Fired Forced
Convection Air Heaters for Commercial and
Industrial Space Heating".
The Installation must also be in accordance with
the relevant requirements of "The Gas Safety
(Installation and Use regulations) and
(Amendment Regulations 1990)" and The
"Building" and "Electrical Regulations" (in GB the
IEE Regulations).
The requirements of the "Local Building
Standards Office", the premises "Insurance"
undertaking and the"Fire Office" must also be
observed.
1.7 Unauthorized
modification
of this appliance or
departure from use in the manner for which it
was intended by the manufacturer or installation
in a manner contrary to these instructions, may
constitute a hazard and jeopardize all
warranties. Deviations should only be carried out
after formal consent has been obtained from the
manufacturer.
1.8
Ensure the environment in which the air heater
will be installed will not create a hazard i.e.
where excessive (volatile) dust, flammable or
corrosive substances and/or vapours and
combustible materials may be present.
1.9 These appliances have been tested, and set
according to the data plate before leaving the
factory.