ACN-TL
Rev. 6.00
©2019, Ambient Recording GmbH
10
FPS Menu
FPS: 23.98/24/
25
/29.97/29.97 DF/30/47.95/48/50/59.94/59.94 DF/60
Toggle to select the project framerate and press. When changing an existing setting you will be asked to
confirm or discard the new selection. As with firmware 6.xx Lockits now support double project rates to
be synchronized via ACN and automatically select double frame sync settings with genlock/PPF
activated. However, as not part of the SMPTE specification, this will have no effect on timecode frame
rate and also cannot be transferred via cable.
CAUTION! Switching between PAL and NTSC or Non-Drop and Drop rates will restart the
generator from zero with the new time base and interrupt the video or audio sync signal. Also
genlock output will be changed or even disabled on selecting an incompatible frame rate for SD
genlock (only available on ACL 204 in Extended menu). While the ACN or cable jam effectively
prevents these critical changes applying these manually while recording may result in a
corrupted file. Important: When using Drop frames make sure the whole set does. NEVER run a
setup with units mixed on non-drop and drop! 29.97DF will neither sync with 29.97, 30, or any
other non-drop rate.
