Version 1.0
©Copyright 2020, Ambient LLC. All Rights Reserved.
Page 17
Figure 12
5.7
Alarm Settings
5.7.1
Turning on and Off the Alarm Feature
In normal mode, press the
ALARM
button to show the alarm time. Press the alarm button again, and
the alarm icon
will appear. Press the alarm button again, and the pre-alert icon
will
appear. Press the alarm button again, and the alarm and pre-alert to turn off, and no alarm will sound.
Figure 13
5.7.1.1
Pre-Alert Feature
The pre-alert wakes you 30 minutes earlier if ice is predicted to allow you extra time to get to work or
school.
Once the ice pre-alert is activated, the alarm will sound 30 minutes earlier if the outdoor temperature
is below -3°C (26.6 °F), where ice is likely to form.
5.7.2
Setting the Alarm Time
While in normal mode, perform the following operations to set the alarm time.
Command
Mode
Settings
[
ALARM
] + 2
seconds
Enter Alarm Settings
Alarm Hour
Press [
UP
] to increase, [DOWN] to decrease.
[ALARM]
Alarm Minute
Press [
UP
] to increase, [DOWN] to decrease.
[ALARM]
Exit Alarm Settings
[ALARM] + 2 seconds means press and hold the ALARM button on the back of the display for two
seconds.
[ALARM]
means press but do not hold the ALARM button on the back of the display.
Figure 14
5.7.3
Using the Alarm and Snooze Functions
When the alarm sounds, press and hold the
ALARM / SNOOZE
button for two seconds to turn off
the alarm sound. The alarm bell will stop flashing.
If no button is pressed during the alarm period, the alarm will turn off automatically after two minutes.
To temporarily silence the alarm, press the
ALARM / SNOOZE
button on the top of the console. The
alarm bell icon will keep flashing.
If the snooze function is turned on, the 4-step crescendo alarm will sound every 2 minutes. Press and
