manualshive.com logo in svg

Ambient Weather WS-3000-X8, User Manual, Page: 9 / 33

Share
Download
Ambient Weather WS-3000-X8 User Manual Download Page 9

 

Version 1.2  

©Copyright 2020, Ambient LLC. All Rights Reserved. 

 

 

 

Page  9 

 

Scroll left key 

Press this key to 

scroll up/left.

 

 

Mode key 

Press this key to enter to next mode

 

Figure 8 

 

4.1.1

 

Display Selection 

You can customize or even scroll between various parameters within each one of the Channel areas. 

Scroll 

 

to selected channel area (1-5), and press the plus 

  key to modify the home 

display screen area: 
 

 

 

Icon 

Description 

 

Scroll up/down key 

Press this key to 

scroll down/up. 

  .

 

 

Selection key 

Press this key to select and enter the option. 

 

Scroll right/left key 

Press this key to 

scroll right/left.

 

 

Return key 

Press this key to back to Setup main menu.

 

Figure 9

 

 

To modify the display parameter, press the up/down 

  and left/right 

  keys to move 

the blue cursor to a sensor channel number (1-8) and parameter (temperature, dew point, heat index). 

Press the 

  key to display this channel and parameter in the selected area on the main screen.   

Summary of Contents for WS-3000-X8


































Reviews:

No comments