Version 2.12
©Copyright 2020, Ambient LLC. All Rights Reserved.
Page 55
Note:
The purpose of calibration is to fine tune or correct for any sensor error associated with the
devices margin of error. Errors can occur due to electronic variation (example, the temperature sensor
is a resistive thermal device or RTD, the humidity sensor is a capacitance device), mechanical
variation, or degradation (wearing of moving parts, contamination of sensors).
Calibration is only useful if you have a known calibrated source you can compare it against and is
optional. This section discusses practices, procedures and sources for sensor calibration to reduce
manufacturing and degradation errors. Do not compare your readings obtained from sources such as
the internet, radio, television or newspapers. The purpose of your weather station is to measure
conditions of your surroundings, which vary significantly from location to location.
6.10
Factory and Data Export
Press
to Enter the Factory Default Mode
Figure 52
Select
Setting
Select
Setting
Scroll left
Scroll
right
Scroll field
up
Scroll
field
down
Enter
sub-setup
mode
return
to home