Version 1.10
©Copyright 2013, Ambient LLC. All Rights Reserved.
Page 4
search will automatically resume every two hours until the signal is successfully captured. The regular
RF link will resume once RCC reception routine is finished. In some locations, RCC reception may
take a couple of days to receive the signal. The temperature and humidity data will continue to
transmit during this period.
Once the radio controlled time is received the
WWVB
icon will be present above the time (reference
Note:
The RCC search icon
is normally off and will momentarily flash when updated. The
signal is passed from the outdoor sensor to the console, and will not update if the outdoor sensor is not
updating properly.
2.4.2
Display Console Layout
Note:
The following illustration shows the full segments of the LCD for description purposes
only and will not appear like this during normal operation.
Figure 2
1. DST (daylight savings time)
2. WWVB Radio Controlled Time
Signal
3. Time
4. Radio Controlled Time icon
5. Alarm ON indicator
6. Day of week/ time zone
7. Date
8. Indoor humidity display
9. Indoor temperature and humidity low
alarm and high alarm
10. Indoor temperature display
11. Temperature display units
16. Outdoor humidity display
17. Outdoor temperature and humidity
low alarm and high alarm
18. Temperature display units
19. Outdoor temperature display
20. General outdoor alarm icon
21. Weather forecast icon
22. Weather tendency indicator
23. Pressure with 24 hour history graph
24. Pressure high alarm
25. Pressure low alarm
26. Absolute or relative air pressure
selection
