Ambient Weather WS-0416, User Manual

Page: 14 / 16

Version 1.0 ©Copyright 2017, Ambient LLC. All Rights Reserved. Page 14
Problem Solution
Indoor and Outdoor Temperature do not
agree Allow up to one hour for the sensors to stabilize due to
signal filtering. The indoor and outdoor temperature
sensors should agree within 2 °F (the sensor accuracy is ±
1 °F).
Use the calibration feature to match the indoor and
outdoor temperature to a known source.
Indoor and Outdoor Humidity do not agree Allow up to one hour for the sensors to stabilize due to
signal filtering. The indoor and outdoor humidity sensors
should agree within 10 % (the sensor accuracy is ± 5 %).
Use the calibration feature to match the indoor and
outdoor humidity to a known source.
Display console contrast is weak Replace console batteries with a fresh set of batteries.
9 Accessories
The following software and hardware accessories are available for this weather station at
www.AmbientWeather.com .
Accessory Description
Ambient Weather F007TH
Wireless
Thermo-Hygrometer for
WS0416 Weather Stations Add additional remote thermo-hygrometers. Supports up to eight
remote sensors.
Ambient Weather
WS0416-C WS0416 Big
Digit 8-Channel Wireless
Thermo-Hygrometer,
Console Only Add as many display consoles as you like to your existing system to
display the remote sensor in different locations.
Ambient Weather
SRS100LX Temperature and
Humidity Solar Radiation
Shield Solar Radiation Shield improves temperature accuracy for hot weather
climates. Remove the rain guard and install over thermo-hygrometer.
Ambient Weather Humidity
Calibration Kits One step calibration kits for digital hygrometers use salt slurry formula
to accurately calibrate the indoor and outdoor hygrometers.
10 Liability Disclaimer
Please help in the preservation of the environment and return used batteries to an authorized depot.
The electrical and electronic wastes contain hazardous substances. Disposal of electronic waste in
wild country and/or in unauthorized grounds strongly damages the environment.
Reading the “User manual” is highly recommended. The manufacturer and supplier cannot accept any