If you use Firefox, Google
Chrome, Safari, select this
login mode.
If you use IE browser,
select this login mode.
If you use Mobile phone,
select this login mode.
LENS
LAN
Power
WPS
Infrared LED
Antenna
Reset Button
2
Software Installation
1.
Insert the CD into the CD drive of your computer.
Shortcut icon for Windows OS
Shortcut icon for Mac OS
Note:
If your computer doesn’t have CD drive, you can download the IP
camera tool from our website for free.
3
Access the Camera
1.
Enable the DHCP feature of your router (Enabled by default normally),
then open the IP Camera Tool program. It should display the camera’s IP
address in your LAN (Local Area Network).
2
. Double click the camera list here, and your default browser will
open up to the camera’s login page.
4
Security
We strongly recommend that you modify your password when you log
in for the first time.
To do this, choose “
Device Management
” on the bottom of the camera
interface, then go to the “
Users Settings
” section on the left side of the
screen.
Here you can change the username and password to prevent intruders
from accessing your camera. The default username is admin with no
password.
Notes:
1.
If you forget your username or password, you can press and hold the
reset button on the bottom of the camera using a pin for 5 seconds. This
resets the camera to factory defaults .
1
Hardware Introduction
Package Contents
Quick Installation Guide
Wi-Fi Antenna
Resource CD
Ethernet Cable
Power Adapter
Mounting Bracket
IP Camera
Physical Description
Hardware Connection
1.
Mount the antenna and make it stand vertically.
2.
Connect the camera to the LAN network (router or switch) via Ethernet
cable.
3.
Connect the power adapter to the camera.
V4.1
2.
Go to the folder “IP Camera Search Tool” and find the folder “For
Windows OS”or “For Mac OS”. Copy and paste the IP camera tool file to your
computer, or drag it onto your desktop.
ambient weather
Quick Installation Guide
（
For Windows & Mac OS
）
Outdoor IP Camera
AMBIENTCAM
3
. Take Microsoft Internet Explorer as an example. For the first time login
the camera, please make sure to install ActiveX when prompted.
Click this button and install
the ActiveX .
4.
Click
Run
button, and re-login the camera, you can see the live video
on the interface.
V1.1
Quick Installation Guide
（
For Windows & Mac OS
）
Outdoor Wireless IP Camera
ambient weather
AMBIENTCAM
Default user name is
admin with no password.
Note
：
There are three login methods. According to the figure prompted,
choose a different login mode.
2.
If you want to access your camera over wireless or the Internet, please
continue with the setup by following the
Wireless Connection
and
Remote Access
steps below.
Http://192.168.11.211:88
