INSTALLATION AND SAFETY INSTRUCTIONS
WARNING: Be sure the electricity to the system you are
working on is turned off; either the fuse removed or the circuit
breaker set at off.
IF YOU ARE UNCLEAR AS TO HOW TO PROCEED,
CONTACT A QUALIFIED ELECTRICIAN.
CAUTION: BE SURE TO CHECK YOUR TRANSFORMER TO
DETERMINE THE VOLTAGE OF THE SYSTEM.
RISK OF FIRE: USE ONLY 12V LAMPS WITH 12V SYSTEMS.
USE OF 12V LAMPS WITH 24V SYSTEM MAY RESULT IN
DAMAGE TO SYSTEM AND SURROUNDING AREA.
CAUTION: RISK OF FIRE: MAXIMUM WATTAGE FOR RAIL
IS: 300W AT 12V; 500W AT 24V.
FOR YOUR SAFETY
IMPORTANT SAFETY INSTRUCTIONS
1. Minimum distance from the front of the lamp to combustible
surfaces is 8”.
2. Be sure to install the rail system where it can not be
shorted out by conductive materials.
3. Make sure all connections are tight.
4. This is a non-electrified support.
5. Space supports no greater than 4 feet apart for straight
sections.
WARNING: Use of other manufacturers components will
void warranty, E.T.L. listing and create a potential safety
hazard.
CAUTION - RISK OF FIRE. KEEP AWAY FROM
COMBUSTIBLE MATERIALS.
FIGURE 1
CANOPY
FITTER
STEM
LV-054
110102
www.SeaGullLighting.com