Use of the implement
UX01 Super CP Plus BAG0229.2 11.21
155
11.2
Preparing the spray liquid
Prepare the spray liquid with the TwinTerminal on the control panel.
WARNING
Risks due to accidental contact with crop protection agents and
/ or spray liquid!
•
Always flush the crop protection agent into the spray liquid tank
through the induction bowl.
•
Swivel the induction bowl into the filling position before you fill
the crop protection agent into the induction bowl.
•
Observe the safety regulations on physical protective equipment
and breathing protection in the instructions for use of the crop
protection agent when handling crop protection agents and
preparing the spray liquid.
•
Do not prepare the spray liquid in the vicinity of wells or surface
water.
•
Avoid leaks and contamination with crop protection agent and/or
spray liquid through appropriate conduct and wearing
appropriate physical protection equipment.
•
To avert risks to third parties, do not leave the prepared spray
liquid, unused crop protection agent or used crop protection
agent canisters and the uncleaned field sprayer unattended.
•
Protect contaminated crop protection agent canisters and the
contaminated field sprayer from precipitation.
•
During and after preparation of the spray liquid, ensure sufficient
cleanliness to keep risks as low as possible (e.g. thoroughly
wash used gloves before removing them and properly dispose of
the washing water and cleaning fluid).
•
The prescribed water and agent rates can be found in the
directions for use of the crop protection agent.
•
Please carefully read the directions for use of the agent and
observe the specified precautions!
