Coupling and uncoupling the implement
UX01 Super CP Plus BAG0229.2 11.21
147
9.2
Uncoupling the implement
WARNING
Danger of being crushed, cut, caught, drawn in or struck
through insufficient stability and possible tilting of the
uncoupled implement!
Park the empty implement on a level parking surface with solid
ground.
When uncoupling the implement, there must always be enough free
space in front of the implement that the tractor can be aligned with the
implement again during recoupling.
1. Place the empty implement on a level parking surface with solid
ground.
2. Uncouple the implement from the tractor.
2.1 Secure the implement against unintentionally rolling away.
See page 140.
2.1 Lower the jack into parking position.
2.2
Un
couple the connection device.
2.3 Drive the tractor approx. 25 cm forwards.
→
This will allow more room between tractor and implement
and give better access for uncoupling the universal joint
shaft and supply lines.
2.4 Secure the tractor and implement against unintentional
start-up and rolling.
2.5 Uncouple the universal joint shaft.
2.6 Place the universal joint shaft in the holder.
2.7 Uncouple the supply lines.
2.8 Fasten the supply lines in their respective parking sockets.
2.9 Hydraulic brake: Release the ripcord for the parking brake
from the tractor.
