Start-up
UX01 Super CP Plus BAG0229.2 11.21
143
8.7
Adjusting the hydraulic system
The hydraulic block is located at the front right on the implement
behind the cover plate.
•
Be sure to match the hydraulic systems of the tractor and the
implement.
•
The implement hydraulic system is adjusted using the system
setting screw on the hydraulic block of the implement.
•
Elevated hydraulic oil temperatures are the result of incorrect
adjustment of the system setting screw, caused by persistent
strain on the pressure relief valve of the tractor hydraulic system.
•
Adjustments may only be made in a pressureless state!
•
If there are hydraulic malfunctions between the tractor and the
implement during start-up, please contact your service partner.
(1) Setting tap can be set to Position A and B
(2) LS connection for the load sensing control
line
Implement-side connections:
(1) P – feed line, pressure line, plug standard
width 20
(2) LS – control line, plug standard width 10
(3) T - return line, socket standard width 20
