Start-up
142
UX01 Super CP Plus BAG0229.2 11.21
4. Put the running wheels onto the stud bolts.
5. Tighten the wheel nuts.
6. Lower the implement and remove the slings.
7. Retighten the wheel nuts after 10 operating hours.
Steering axle
The steering angle of the steering axle
must be limited depending on the
wheels.
Otherwise, the wheel can collide with
the implement.
(1) Adjust using the stop screw and
lock nut.
(2) Make adjustments using the
spacers.
8.6
Initial operation of service brake system
Perform a braking test for the trailed sprayer in an empty and loaded
state to test the braking behaviour of the tractor and coupled trailed
sprayer.
We recommend that you have a specialist workshop coordinate the
brakes on the tractor and trailed sprayer in order to attain optimum
braking and minimum wear to brake linings (see "Maintenance"
section, page 202).
