Layout and function of the sprayer boom
106
UX01 Super CP Plus BAG0229.2 11.21
6.8
Nozzles
(1) Nozzle body with bayonet connection
ο
Spring element version with shutter
ο
Spring element version, bolted
(2) Diaphragm. If the pressure in the spray line
falls below approx. 0.5 bar, the spring
element (3) presses the diaphragm onto the
diaphragm seat (4) in the nozzle body. This
ensures that when the sprayer boom is
switched off, the nozzles are deactivated
without subsequent dripping.
(3) Spring element.
(4) Shutter; holds the entire diaphragm valve in
the nozzle body
(5) Nozzle filter; fitted as standard on machines
with 50 mesh/inch, is inserted from below
into the nozzle body.
(6) Rubber seal
(7) Nozzle with bayonet cap
6.8.1
Multiple nozzles
It is advantageous to use multiple nozzle heads
when using different nozzle types.
Turning the multiple nozzle head
counterclockwise brings a different nozzle into
play.
The multiple nozzle head is switched off in the
intermediate positions. This provides the
possibility of reducing the working width of the
boom.
Flush the spray lines before twisting
the multiple nozzle head to another
nozzle type.
