manualshive.com logo in svg

Amazone Profihopper 1500 SmartLine, Operating Instructions Manual

Share
Download
Amazone Profihopper 1500 SmartLine Operating Instructions Manual Download Page 55

3.20

Threaded cartridge

The threaded cartridge contains the following items:

Documents

Aids

CMS-I-00002306

3.21

AMAZONE cooling system - Self-cleaning cooling air system

The system removes dust and plant residues from the
radiator grille. Plant residues are produced
particularly when mulching.

The system works automatically.

The air current of the main fan 

1

 is intermittently

interrupted and the additional cleaning fan 

2

reverses the air current. The air current removes
plant residues and dust from the grille.

CMS-I-00002299

Afterwards, the cleaning fan 

2

 is switched off again

and the main fan 

1

 is switched on. The air current

can then optimally reach the radiator again.

CMS-I-00002298

CMS-T-00001776-B.1

CMS-T-00002467-B.1

3 | Product description

Threaded cartridge 

MG6399-EN-II | D.1 | 11.03.2020

49

Summary of Contents for Profihopper 1500 SmartLine



























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands