6.3.9 Operation without front hopper
If the implement should be used without the
front hopper,
install the terminating resistor
1
on the signal
cable
2
for the front hopper.
CMS-I-00005657
6.4 Preparing the implement for operation
6.4.1 Folding the lighting
The lighting must be folded in during operation.
Move both lighting panels
1
into parking
position.
1
CMS-I-00003214
6.4.2 Unfolding the implement sections
CAUTION
There are crushing and shear points
between the implement sections and the
implement.
When folding or unfolding the
implement sections,
never reach into the crushing area.
CMS-T-00008281-A.1
CMS-T-00005513-B.1
CMS-T-00004418-A.1
CMS-T-00005525-B.1
6 | Preparing the machine
Preparing the implement for operation
MG6967-EN-II | C.1 | 27.09.2021
64
