12. Install spacer discs that are not required on the
opposite side of the cutting disc bearing with the
central bolt.
13. Put on and tighten the central bolt.
14. Install the dust caps.
15. Install the depth control wheel along with the
bracket.
16. Put on and tighten the bolt.
9.1.3 Adjusting the cutting disc distance on the PreTeC coulter
INTERVAL
Every 100 operating hours
or
as required
1. Remove the depth control wheel along with the
bracket
1
.
2. Remove the dust caps
2
.
3. Unscrew and remove the central bolts
3
.
NOTE
The central bolts have different threads:
The right central bolt has right-hand thread
The left central bolt has left-hand thread
4.
To ensure that the cutting discs touch slightly,
remove
5
or
add the spacer discs as required.
5. Install spacer discs that are not required on the
opposite side of the cutting disc bearing with the
central bolt.
6. Put on and tighten the central bolt.
CMS-I-00002017
CMS-T-00002376-D.1
9 | Repairing the machine
Maintaining the machine
MG6967-EN-II | C.1 | 27.09.2021
187
