REQUIREMENTS
The implement is raised
WARNING
An unexpected hydraulic function is
activated
Before you actuate the tractor control
unit,
check the selected hydraulic function of
the Comfort hydraulic system.
1.
To fold the implement,
actuate the "green 2" tractor control unit.
The transport lock
1
engages.
2.
When the transport lock has engaged,
put the "green 2" tractor control unit in the neutral
position.
3.
If the permitted transport height of the folded
implement is exceeded,
lower the implement according to the national
regulations.
CMS-I-00003932
6.5.5 Increasing the mechanical coulter pressure
IMPORTANT
The seeding coulters swing strongly
during road transport
To prevent the seeding coulters from
swinging during road transport,
increase coulter pressure.
To put the coulter pressure to the middle
position,
see "Adjusting the coulter pressure
mechanically".
6.5.6 Locking the tractor control units
Depending on the equipment, the tractor control
units are locked mechanically or electrically.
CMS-T-00007516-A.1
CMS-T-00006337-A.1
6 | Preparing the machine
Preparing the machine for road travel
MG6967-EN-II | C.1 | 27.09.2021
162
