6.5.11.3 Checking the seed placement depth
1.
Seed approx. 30 m at working speed.
2.
Expose the grains at several points using the
multi-placement tester.
3.
Use the read-off edge of the multi-placement
tester to remove the earth in layers.
4.
Place the multi-placement tester horizontally on
the ground.
5.
Set the pointer
1
on the seed grain.
6.
Read the seed placement depth on the scale
2
.
7.
If the desired seed placement depth cannot be
set, increase the coulter pressure.
See section "Adjusting the coulter pressure".
2
1
CMS-I-00002010
6.5.12 Adjusting the grain singling unit
6.5.12.1 Changing the singling disc
1.
Secure the tractor and implement.
2.
Open the locks
1
.
3.
Remove the cover
2
.
1
2
CMS-I-00001909
CMS-T-00002411-D.1
CMS-T-00005516-D.1
CMS-T-00005572-C.1
6 | Preparing the machine
Preparing the implement for operation
MG6149-EN-GB | J.1 | 18.10.2022 | © AMAZONE
88
Summary of Contents for Precea 4500-2
Page 255: ......
